{"product_id":"dtw-warp-fin-mto-2027","title":"Duotone Warp_Fin (MTO) 2027","description":"\u003cp\u003eA fin racing slalom sail built to be rigged to its markers and raced straight from the bag.\u003c\/p\u003e\u003cp\u003eThe Warp_Fin is Duotone’s fin racing sail for PWA-style slalom and course racing. Take it out of the bag, rig it to the trim markers and it is ready to race, with no hours lost hunting for the perfect trim.\u003c\/p\u003e\u003cp\u003eFor 2027 Duotone has made two structural changes. Overlapping Seams join neighbouring panels so they carry load as one unit. That reduces distortion under pressure, sends power more directly to the board and helps the sail keep its shape in gusts. The new Hybrid Batten Construction then places glass and carbon battens by position. Glass battens widen the low-end planing range and keep the sail manageable in short, steep chop, while carbon battens stiffen the upper sections for quicker acceleration and a steadier shape in strong winds.\u003c\/p\u003e\u003cp\u003eThe 5.2 has been reworked on its own for more precise control in high winds, and the 9.0 is back in the range.\u003c\/p\u003e\u003cp\u003eEvery size has seven battens and four cambers. Hyper Cam 2.0 sets camber tension with a single Torx screw instead of spacers, even on a fully rigged sail, so you can switch between maximum drive and quicker rotation in seconds. Its exposed rollers keep rotation light and even on all SDM mast diameters. The high-aspect design, most marked in the bigger sizes, shortens the boom and moves the profile forward, so the rig feels lighter in your hands at the top of its wind range.\u003c\/p\u003e\u003cp\u003eBatten tension is set before the sail reaches you. iRocket 2.0 calibrates each batten at the factory with a torque wrench and the screws are locked with thread glue. VTS 2.0 markers in the top panel show the downhaul setting, HTS 2.0 shows where your harness lines should sit, and Double Seam Technology cuts panel bending-elongation by up to 50%.\u003c\/p\u003e\u003cp\u003eThe 2027 Warp_Fin comes in seven sizes: 5.2, 5.7 and 6.2 m² in red, and 6.7, 7.7, 8.5 and 9.0 m² in turquoise\/black. It is designed for SDM masts only; the rigging table below lists the recommended mast for each size. Select a colour and size above.\u003c\/p\u003e\u003ch3\u003eMade to order, delivered by Duotone\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAllow 12–18 weeks from order for made-to-order purchases.\u003c\/strong\u003e Duotone builds and delivers your sail directly. Pay the full amount upfront in one checkout with The Kitesurf Centre. Orders containing other items may arrive in separate shipments; applicable shipping charges are shown at checkout.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to race\u003c\/strong\u003e: Rig to the trim markers and race, without hours spent hunting for the perfect trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverlapping Seams\u003c\/strong\u003e: New for 2027. Neighbouring panels are bonded into one load-bearing unit, so the sail holds its shape in gusts and drives power straight to the board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Batten Construction\u003c\/strong\u003e: New for 2027. Glass battens extend low-end planing and handle chop, while carbon battens in the upper sections speed up acceleration in strong winds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHyper Cam 2.0\u003c\/strong\u003e: Camber tension adjusts with a single Torx screw instead of spacers, even when the sail is fully rigged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize-specific design\u003c\/strong\u003e: Three size-dependent design concepts match each sail size to the wind it will be used in, and the 2027 5.2 has been reworked for high-wind control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight in the hands\u003c\/strong\u003e: A high-aspect outline, most marked in the larger sizes, shortens the boom and moves the profile forward to reduce effort at the top of the wind range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeveloped on the course\u003c\/strong\u003e: Tested in real race conditions against competitor sails by the Duotone race team.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Duotone Windsurfing","offers":[{"title":"red \/ 5.2","offer_id":54497122615633,"sku":"9010583346717","price":1249.0,"currency_code":"GBP","in_stock":true},{"title":"red \/ 5.7","offer_id":54497122648401,"sku":"9010583346700","price":1269.0,"currency_code":"GBP","in_stock":true},{"title":"red \/ 6.2","offer_id":54497122681169,"sku":"9010583346694","price":1289.0,"currency_code":"GBP","in_stock":true},{"title":"aqua \/ 6.7","offer_id":54497122517329,"sku":"9010583346731","price":1309.0,"currency_code":"GBP","in_stock":true},{"title":"aqua \/ 7.7","offer_id":54497122550097,"sku":"9010583346724","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"aqua \/ 8.5","offer_id":54497122582865,"sku":"9010583346748","price":1399.0,"currency_code":"GBP","in_stock":true},{"title":"aqua \/ 9.0","offer_id":55286004613457,"sku":"9010583356884","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0981\/1879\/5601\/files\/14270-1214_C02turquoiseblack_P_1.png?v=1785868368","url":"https:\/\/www.thekitesurfcentre.com\/products\/dtw-warp-fin-mto-2027","provider":"The Kitesurf Centre","version":"1.0","type":"link"}