The SLICE carbon comes with a set of F-ONE FLOW RTM finsSand taking advantage of its lightweight the board truly lives to all expectations as the ultimate freestyle board.
2019 F-One Slice Flex
The 2019 F-one SLICE FLEX is designed as a strapless freestyle weapon, it’s also an easy and intuitive board to ride in the waves!
Standing out of the crowd of the compact shapes, the SLICE is ready to blow you away by its versatility and ease of use.
- Strapless Freestyle Weapon
- Early planing and excellent pop
- Control during aerial tricks
- Fantastic wave-riding abilities
- Comes with a set of F-ONE FLOW RTM fins
The board has a straighter rocker and a parallel outline, which fades into a dynamic winger tail to increase its manoeuvrability. The squared off nose keeps the length to a minimum, and there are two sizes for you to choose from. The 5’3” is perfect for larger riders over 75kg who would usually ride a board around 5’8” while the smaller 5’1” is ideal for smaller riders.
Freestyle is a lot about control, pop, landing:
The volume and the thickness of the SLICE have been specifically tailored for kiting to ensure the highest possible level of performance.
Underneath you’ll find a single concave with central channel which has been extended and now runs along the entire length for more directional stability.
The rails of the board are thin to allow you to hold a better edge and also to increase the pop, making freestyle tricks easier. The distinct kick in the rocker line around the fins has been emphasised to get more pop out of the board.
The nose is pulled up slightly to help nailing the landings while the long channel provides the stability required.
The board delivers plenty of speed, both on flat water, for tricks, and in the waves too. The flatter rocker line enables the board to carry itself through weaker sections of the wave and the thin rails and pulled in winger tail make for dynamic turns on the face. And the thruster fin set up offers maximum versatility across a wide range of conditions, while also making the board easier to use.
The 2019 SLICE is best suited to small and medium sized waves and excels when the conditions are onshore, and the waves aren’t too powerful. The increased speed offered by the board allows you to negotiate the wave without relying on its power as much.
For strapless freestyle riding, the compact dimensions make it very easy to manoeuvre the board in the air and swing weight is reduced. Even performing simple jumps is made easier, with a wide stance pop comes easy and the light nature of the board will help you improve incredibly quickly.
The SLICE will switch your level to “fast forward” mode!
The SLICE CARBON uses the HD foam carbon construction where the use of carbon fiber allows a lighter structure and therefore a lighter board to bring your strapless riding to the next level. Mixing HD foam with 45° bi-axial carbon fiber and some deck stringers for durability, we have designed some boards that will fulfill the most demanding riders. The SLICE carbon comes with a set of F-ONE FLOW RTM fins and taking advantage of its lightweight the board truly lives to all expectations as the ultimate freestyle board.
HD FOAM FLEX COMPOSITE
The introduction of this construction has marked a major change into the F-ONE surfboard range and especially on our three key products.
To face the ever higher constrains applied by the riders on their surfkites F-ONE has engineered a new foam composite construction with optimized flex for maximum reliability, comfort and manoeuvrability. The mechanical characteristics achieved by this construction provide a lighter weight and a perfect surfboard feel.
As the strapless discipline develops and grows, so does the demands it puts on the boards.
With higher jumps and tougher landings, the stresses applied to the boards have migrated towards the rails and we have reinforced some of our constructions with lateral deck stringers to make the boards more robust in these areas. These stringers are not full depth to keep the flex and feel of the board.
RTM technology stands for RESIN TRANSFER MOLDING.
This process uses a closed mold to produce accurate composite parts.
The resin is injected in the mold after it is closed, with the dry fiber having been placed inside beforehand. The closed mold injection allows for great shape accuracy and the epoxy resin used make the fins stronger and more responsive providing a sharper feel on the water.
- UK: FREE standard delivery of 1-5 working days (usually 1-2 days) on all UK purchases over £79.99 – Upgrade to Express Delivery for £4.99 UK Orders under £79.99: £4.99 Standard, £6.99 Express
- Europe Mainland and UK Highlands & Islands: £9.99 on all items under 2 kg and £19.99 over 2kg
- Rest of the World and European Islands: £19.99 for small items under 2kg, £39.99 over 2kg and £69.99 for all items over 6kg. Fedex available as an upgrade option for all countries and the only option for Asia, Africa and South America
- Surfboards and SUPs have an additional £29.99 shipping cost. Due to a huge percentage which have arrived damaged we now only use reliable (more expensive) couriers
VAT (Tax) Free
If you live outside the EU or have a BFPO address, you are eligible for VAT free (20%) purchases so can save a lot of money. This is automatically deducted at checkout but please contact us if you would like further information. The prices shown on the website include VAT as standard until you enter your shipping country at the shipping Basket/Checkout page or are already logged in.
If for any reason you are unhappy with your purchase, you can return it to us in its original condition (with packaging and tags intact) within 14 days of the purchase date. We can either issue an in store credit for the item, send a different size or product if you would like an exchange or refund your payment.